Group 6 Operation – Elements and procedures Page 51
Release R1.03e LEIBINGER JET3
Button <Printstart> (11): With this button the print job will be released for
processing. If a print job is activated, the button is displayed backlighted. It will be
printed as soon as a PrintGo is released.
= Print start inactive (Print job is not released for processing)
= Print start active (Printer is in active print mode)
To carry out a print process, you have to enter a text or you have to select an
existing job. You will find further information regarding this topic in the group
Jobeditor.
Button <Printstop> (12): The released print job is stopped with this button. If a
print stop is activated, the button is displayed backlighted.
= Print stop inactive
= Print stop active (current print job is stopped or no job for
processing is released)
To Next Page
Loading...
