Message Action
Replace [type] imaging kit, 0 estimated
pages remain [84.xy]
Replace the indicated imaging kit to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User’s Guide or
visit
http://support.lexmark.com.
Replace defective [color] cartridge
[31.xy]
Replace the defective toner cartridge to clear the message.
For more information, see the instruction sheet that came
with the supply.
Note: If you do not have a replacement toner cartridge,
then see the "Ordering supplies" section of the User’s Guide
or visit
http://support.lexmark.com.
Replace defective black and color imaging
kit [31.xy]
Replace the defective imaging kit to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User’s Guide or
visit
http://support.lexmark.com.
Replace maintenance kit, 0 estimated
pages remain [80.xy]
Contact customer support at
http://support.lexmark.com or
your service representative, and then report the message. The
printer is scheduled for maintenance.
Replace missing [color] cartridge
[31.xy]
Install the indicated toner cartridge to clear the message. For
more information, see the “Replacing supplies” section of the
User’s Guide.
Replace missing black and color imaging
kit [31.xy]
Install the indicated imaging kit to clear the message. For more
information, see the “Replacing supplies” section of the User’s
Guide.
Replace waste toner bottle [82.xy]
Replace the waste toner bottle to clear the message.
Replace unsupported [color] cartridge
[32.xy]
Remove the toner cartridge, and then install a supported one
to clear the message.
Note: If you do not have a replacement cartridge, then see
the "Ordering supplies" section of the User’s Guide or visit
http://support.lexmark.com.
Replace unsupported black and color
imaging kit [32.xy]
Remove the indicated imaging kit, and then install a supported
one to clear the message.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User’s Guide or
visit
http://support.lexmark.com.
Replace missing waste toner bottle
[82.xy]
Install the missing waste toner bottle to clear the message.
For more information, see the instruction sheet that came
with the supply.
5027
Diagnostic information
78
To Next Page
Loading...
Need help?
General
