Operation
4
Operation
e3871503a
1
2
Activating the parking brake manually
The parking brake can be activated manually
using the switch (1) when the truck is switched
on.
NOTE
In safety-critical situations (e.g. when a worker
is in a raised workshop hoist), the parking
brake must be activated manually using the
switch (1). This will result in all of the driving
functions being blocked.
Actuate the switch (1).
The red LED (2) in the switch (1) lights up.
Display_e0053b
10:30
03.03.2015
4
20
h
min
EFF
The "Parking brake activated" symbol (see
arrow) lights up continuously in the display
unit.
The manual parking brake is active.
The driving functions are blocked.
DANGER
Risk of accident and injury
Do not actuate the switch (1) for the parking brake
while the truck is in motion.
In some circumstances, the load can slip from the
fork arms if the parking brake is applied too sharply.
Only actuate the switch (1) while the truck is in
motion if emergency braking via the stop pedal is
not sufficient.
Operating Instructions – 3888011701 EN – 12/2017 127
To Next Page
Loading...
