Linde E35 - Page 152

4
Operation
Operation
"Load weight indicator" assistance
function
The weight of the load being carried is shown
on the display unit.
To ensure an accurate measurement, the
following requirements must be met:
• The truck must be on a flat, lev
el surface
and must be at a standstill
• The lift mast must be in a vertical position
• The fork carriage must not be raised more
than 1.70 m above the ground The load
weight indicator does not show reliable
values at heights above 1.70 m
• Before the measurement, t
he load must be
lowered by 10 cm.
• The raised load must be stationary
 Lift the load.
 Lower the load by 10 cm.
 Select the load weight indicator
on the
display.
1
e3871624
 Briefly press push butt
on (1) in the armrest.
142 Operating Instructions – 3888011701 EN – 12/2017