MacDon A40D - Page 130

262334 112 Revision A
1013636
A
Figure 3.162: Primary Driveshaft
10. Use the wrench on the left end of primary driveshaft (A) to
turn the rolls forward until the plug clears.
11. Return the wrench to the storage location, and secure it in
place with a pin.
WARNING
Return the unplug wrench to the storage location, and close the
left driveshield before restarting the machine.
NOTE:
If plugging persists, refer to 6 Troubleshooting, page 227.
OPERATION