Recommended Fluids and Lubricants
Your machine can operate at top efficiency ONLY if clean lubricants are used.
• Use clean containers to handle all lubricants.
• Store in an area protected from dust, moisture, and other contaminants.
Lubricant
Specification
Description
Use
Capacities
Grease
SAE Multi-
Purpose
High temperature extreme
pressure (EP2) performance
with 1% max molybdenum
disulphide (NLGI Grade 2).
Lithium base.
As required unless
otherwise specified
—
Grease
SAE Multi-
Purpose
High temperature extreme
pressure (EP) performance
with 10% max molybdenum
disulphide (NLGI Grade 2).
Lithium base.
Driveline slip-joints
—
Gear lubricant
SAE 85W-140
API service class GL-5 Knife drive box
2.1 liters (2.2 US qts)
Gear lubricant
SAE 85W-140
API service class GL-5
Conditioner drive
gearbox
1 liter (1.06 US qts)
Hydraulic oil
SAE 15W-40
Compliant with SAE specs for
API class SJ And CH-4
engine oil.
Lift and header drive
systems reservoir
126 liters (33 US gal)
To Next Page
Loading...
