Summary of Changes
At MacDon, we’re continuously making improvements: occasionally these improvements affect product documentation.
The following list provides an account of major changes from the previous version of this document.
Section
Summary of Change
Internal Use Only
Throughout manual
Added M2 Series Windrower content.
Technical Publications
EC Declaration of Conformity, page i Updated the EC Declaration of Conformity
and added UK Declaration of Conformity.
Technical Publications
Introduction, page v
Removed a note that is no longer
applicable.
Technical Publications
1.8 Decommissioning and Disposing of
Agricultural Equipment, page 10
Added topic. ISO 3600 Standard
1.10 Safety Sign Locations, page 13 Added illustration that shows the
conditioning devices entanglement hazard
decal (MD #320514).
ECN 64527
1.11 Understanding Safety Signs, page
16
Removed header crushing hazard decal
(MD #304464 and MD #41980).
Technical Publications,
Safety
Added conditioning devices entanglement
hazard decal (MD #320514) content.
ECN 64527
3.1 Attaching A40DX Auger Header to
M2 Series Windrower, page 29
Added topic. Technical Publications
3.2 Detaching A40DX Auger Header
from M2 Series Windrower, page 33
Added topic. Technical Publications
3.8.4 Setting Auger Position, page 79
Added content for clarity.
Product Support
3.8.3 Adjusting Reel Speed, page 79 Added an important statement. Product Support
3.8.9 Checking and Adjusting Float –
M2 Series Windrowers, page 90
Added topic.
Technical Publications
Checking Float – M2 Series
Windrowers, page 90
Added topic. Technical Publications
Removing and Restoring Float – M2
Series Windrowers, page 92
Added topic. Technical Publications
Setting Float Options with Fixed Deck
– M2 Series Windrowers, page 93
Added topic. Technical Publications
Setting Float Options with Fixed Deck
– M1 Series Windrowers, page 98
Added topic.
Technical Publications
Positioning Side Deflectors, page 104
Added a step. Technical Publications
3.9.1 Recommended Settings and
Checks for A40DX GSS Auger Header,
page 110
Added topic. Product Support
4.4 Adjusting Auger Cover, page 130 Added topic. Product Support
Lubrication Points: Knife and Gearbox,
page 140
Removed redundant footnote. Technical Publications
Removing Knife Drive Box Pulley, page
163
Revised the title for clarity. Technical Publications
Installing Knife Drive Box Pulley, page
163
Revised the title for clarity. Technical Publications
Changing Knife Drive Box Oil, page 163 Updated the quantity of the knife drive box
lubricant from 2.2 liters to 2.1 liters.
ECN 63317
262334 vii Revision A
To Next Page
Loading...
