Conventions
The following conventions are used in this document:
• Right and left are determined from the operator’s position. The front of the header is the side that faces the crop; the
back of the header is the side that connects to the windrower.
• Unless otherwise noted, use the standard torque values provided in Chapter 7.1 Recommended Torques, page 233.
NOTE:
Keep your MacDon publications up-to-date. The most current version can be downloaded from our website (www.macdon.
com) or from our Dealer-only site (https://portal.macdon.com) (login required).
NOTE:
This manual is currently available in English and in Russian. The Russian translation of this manual can be ordered from
MacDon, downloaded from the MacDon Dealer Portal (https://portal.macdon.com) (login required), or downloaded from
the MacDon international website (http://www.macdon.com/world).
262334 vi Revision A
To Next Page
Loading...
