Degas Conditions File ASAP 2460 Operator’s Manual
3-14 246-42800-01 - Aug 2013
Field or Button Description
Degas Conditions
dropdown list
Use to select for a .DEG file that contains degas condition parameters to be
used in the analysis.
Heating Phase table Enter up to five stages of degas conditions.
• Temperature - soaking temperature with flowing gas.
• Temperature Ramp Rate - rate at which the temperature is to change
when advancing to the soak temperature.
• Time - amount of time to soak the sample.
Close button
Preview button
Save button
Table buttons
Refer to Common Fields and Buttons - File Menu Options, page 3-1.
To Next Page
Loading...
