Degas ASAP 2460 Operator’s Manual
4-26 246-42800-01 - Aug 2013
Show SmartPrep Status
Unit > Degas > Show SmartPrep Status
The SmartPrep Status window allows you to monitor the degas operations and stop gas flow
after samples are degassed.
Field or Button Description
Skip button Use to skip the degassing of the selected sample.
Cancel button Use to cancel the degassing of the selected sample.
Set Temperature
button
Use to set the temperature of the selected port.
Start Gas Flow button Begins gas flow to the selected port.
Stop Gas Flow button Stops gas flow to the selected port.
To Next Page
Loading...
