ASAP 2460 Operator’s Manual Introduction
246-42800-01 - Aug 2013 3-1
3. FILE MENU
Introduction
This chapter contains information specific to the File menu options used to create and open sample and
parameter files. This chapter provides details of File menu options, commonly used functions and but-
tons, and field descriptions.
Common Fields and Buttons - File Menu Options
The following fields and buttons are common to many of the File Menu windows. Field and button
descriptions not listed below are found in their respective sections
.
Common field and button descriptions are listed in a Common table at the beginning
of their respective chapters. Field and button descriptions not listed in the Common
table are listed in their appropriate heading.
Refer to the Appendix section of this manual for further details on report calculations
(
CALCULATIONS, page C-1), free space correction (FREE SPACE CORRECTION,
page D-1
), and DFT models (DFT MODELS, page F-1).
Field or Button Description
Autoscale checkbox When enabled on report parameters screens, allows the x- and y-axes to be
scaled automatically. Autoscale means that the x- and y- ranges will be set
so that all the data are shown. If Autoscale is not selected, the entered range
is used.
To Next Page
Loading...
Need help?
General
