Performing an Analysis ASAP 2460 Operator’s Manual
2-46 246-42800-01 - Aug 2013
Micropore Analysis
In Micropore mode, up to six analyses are started together. Once a set is started, no other samples can
be started until the set is complete.
1. Select Unit
> Start Micropore Analysis. The Micropore Analysis dialog is displayed.
2. Perform steps 3 through 9 in the topic Krypton Analysis, page 2-42.
Micropore analyses are available only if the Micropore option is installed on the
analyzer.
To Next Page
Loading...
