ASAP 2460 Operator’s Manual Using the Software
246-42800-01 - Aug 2013 1-17
Setup Program
The Setup program is located on the installation CD. It is used to:
• Reinstall the application
• Add an analyzer
• Move an analyzer
• Remove an analyzer
• Change analyzer setup
• Reinstall calibration files for an analyzer
• Import an analyzer from a previous installation on this PC
Tutorials Provides access to instructional tutorials.
Micromeritics on the
Web
Provides a link to the Micromeritics web page:
www.Micromeritics.com
ASAP 2460 on the Web Provides an Internet link to additional 2460 information.
About ASAP 2460 Provides the analysis program version number.
If the IP address needs to be changed on the computer connected to an analyzer,
reference the Entering Ethernet Settings in Windows 7 tutorial (accessed from the Help
menu). The IP address for the computer and the IP address specified in the setup
program must match.
Help Menu Option Description (continued)
To Next Page
Loading...
