ASAP 2460 Operator’s Manual Using the Software
246-42800-01 - Aug 2013 1-11
Using the Software
Shortcut Menus
Shortcut menus are available for:
• the instrument schematic when Manual Control is enabled. Refer to Enable Manual Control, page
4-14.
• onscreen graphs and tabular reports. Refer to Report Shortcut Menus, page 5-20.
Shortcut Keys
Shortcut keys can be used to activate some menu commands. Shortcut keys or key combinations (when
applicable) are listed to the right of the menu item.
Another shortcut method of accessing a menu or function is to use the Alt key plus the underlined let-
ter in the menu command. For example, to access the F
ile menu, press Alt + F. Then press the
underlined letter on the submenu. For example, Alt + F opens the File menu; then press O to access the
File Selector for opening files.
The software screens shown in this manual represent a six-port ASAP 2460 system.
The number of ports shown on the screens will differ according to the system
configuration (from two to six ports).
If the underscored letters do not display menus and windows, press the Alt key on the
keyboard.
To Next Page
Loading...
Need help?
General
