ASAP 2460 Operator’s Manual Appendix F
246-42800-01 - Aug 2013 F-17
References
The papers listed below provide additional information on DFT models:
1. “Determination of Pore Size Distribution from Density Functional Theoretic Models of
Adsorption and Condensation within Porous Solids,” J.P. Olivier and W.B. Conklin,
Micromeritics Instrument Corp; presented at the International Symposium on the Effects of
Surface Heterogeneity in Adsorption and Catalysts on Solids, Kazimierz Dolny, Poland (July
1992).
2. “Classification of Adsorption Behavior: Simple Fluids in Pores of Slit-shaped Geometry,” Perla
B. Balbuena and Keith E. Gubbins, Fluid Phase Equilibria, 76, 21-35, Elsevier Science
Publishers, B.V., Amsterdam (1992).
3. “Modeling Physical Adsorption on Porous and Nonporous solids Using Density Functional
Theory,” J.P. Olivier, Journal of Porous Materials, 3, 9-17 (1995).
4. “The Determination of Surface Energetic Heterogeneity Using Model Isotherms Calculated by
Density Functional Theory,” J.P. Olivier; presented at the Fifth International Conference on the
Fundamentals of Adsorption, Pacific Grove, CA (1995).
To Next Page
Loading...
