Micromeritics ASAP 2460 User Manual

ASAP 2460 Operator’s Manual Report Options Files
246-42800-01 - Aug 2013 3-45
Surface area correction factor 
text box
Enter the value to correct for surface areas that are not smooth.
This brings the values for BET surface area and micropore
surface area into accordance. For most samples, the default
value of 1.000 is adequate.
Fitted thickness range text boxes Enter the minimum and maximum thicknesses (in angstroms or
nanometers) to include in the thickness curve. Go to Options >
Units to specify default units. Refer to UNIT MENU, page 4-1.
Tabular report checkbox Use to have a tabular report of data generated.
t-Plot checkbox Use to have a graphical representation of data generated.
• Overlay samples checkbox - use to overlay sample files on
the t-plot.
• Autoscale x-axis - the x-axis field shows the statistical
thickness of the adsorbed film.
• Autoscale y-axis - the y-axis field shows the quantity of gas
adsorbed.
Pressures button Refer to Pressures button, page 3-30.
Cancel button
From / To text boxes
OK button
Table buttons
Refer to Common Fields and Buttons - File Menu Options,
page 3-1.
Field or Button Description (continued)

Micromeritics ASAP 2460 Specifications

General

Brand	Micromeritics
Model	ASAP 2460
Category	Measuring Instruments
Language	English