Ordering Information ASAP 2460 Operator’s Manual
8-2 246-42800-01 - Aug 2013
Part Number Item and Description
004-25104-00 Ferrule, rear, Nylon 1/4 in.
004-25913-00 Ferrule set, 1/8-in. PEEK, used on gas lines
290-25846-00 Copper tube, for gas inlet, 1/8-in. diameter, 6 ft.
290-25846-01 Copper tube, for gas inlet, 1/8-in. diameter, 16 ft.
004-25549-00 Reducer, 1/8-in. tube x 1/4-in. tube, accepts 1/8-in. tube, connects to
1/4-in. swage fittings
004-62230-58 Gas pressure regulator assembly, CGA 580, no-pressure relief valve
(30 psig for N
2
, He, Kr)
004-33601-00 Regulator Expansion Kit; adds an additional outlet to the gas
regulator, includes fittings and instructions
004-33602-00 Pressure Relief Kit; prevents excessive gas pressure in the event of
regulator failure (not to be used with noxious gases)
004-62230-32 Gas pressure regulator, CGA 320 fitting (CO2), 30 psig
004-16821-00 Reference material, high surface area
004-16816-00 Reference material, low surface area (krypton)
004-16843-00 Reference material, micropore, 13X
004-16844-00 Reference material, micropore, Y-zeolite
004-54609-00 Sample tube brush
240-25853-00 Sample tube funnel
240-14855-00 Sample tube rack
240-32805-00 Sample tube support, assists sample weighing
200-25840-00
Saturation pressure (p
o
) tube, includes isothermal jacket
004-25006-00
O-ring, size 006, Buna-N, for p
o
tube
004-54618-00 Sample Port O-ring removal tool
260-25873-00 Sample port plug
250-25608-00 Valve gasket, Kel-F, for analysis manifold
250-25627-00 Valve plunger, Buna-N seal, for analysis manifold
201-22600-00 Valve spring, for Buna-N plunger, for analysis manifold
003-22617-00 Valve, 0.25 orifice, 24 VDC 10-32MT
003-22617-01 Valve, for gas inlet ports and saturation pressure ports
To Next Page
Loading...
