ASAP 2460 Operator’s Manual Ordering Information
246-42800-01 - Aug 2013 8-5
Part Number Item and Description
004-25044-00 F O-ring, size 013 for 1/2-in. sample tube
260-25843-00 G Ferrule, 1/2 in.
300-25824-00 H Nut, sample tube
004-32604-00 I Cap (stopper), for 1/4-in. sample tube
004-32004-00 J Stopper, for 3/8-in. sample tubes
240-32000-00 K Stopper, for 1/2-in. sample tube
260-25890-00 L
Seal Frit with built-in check valve for air-sensitive samples
(for 1/2-in. tubes only)
300-25862-00 M
TranSeal assembly; for use with 1/2-in. sample tubes only
202-25901-00 N
Isothermal jacket, 1/4 in.
240-61001-00 O Sample tube, 1/4 in.
240-61014-00 P Filler rod, 1/4 in.
202-25902-00 Q Isothermal jacket, 3/8 in.
240-61002-00 R Sample tube, 3/8 in.
240-61015-00 S Filler rod,
3/8 in.
202-25903-00 T Isothermal jacket, 1/2-in. sample tube
240-61003-00 U Sample tube, 1/2 in.
240-61016-00 V Volume displacement insert
302-25821-00 Hanging filler rod for 1/4-in. sample tubes (not shown)
302-25821-01 Hanging filler rod for 3/8-in. sample tubes (not shown)
302-25821-02 Hanging filler rod for 1/2-in. sample tubes (not shown)
004-54130-00 Extractor, for seal frit opener (not shown)
To Next Page
Loading...
