ASAP 2460 Operator’s Manual Editing the Default Method
246-42800-01 - Aug 2013 2-5
4. In the Sample file name text box, enter an optional default file name. This information will be
appended to the sequence number as a part of the file name and will also display in the Sample
text box when a sample file is created. The $ character must remain in this field.
5. In the text box to the right of the Sample field, enter a format for the default sample identification.
Include the $ character to automatically include the contents of the Sequence Number field and
Sample file name field as part of the sample identification.
6. Enter default Operator, Submitter, and Bar Code identification information in the respective
text boxes.
This information will display in the Sample Description tab of new sample
information files.
7. To specify default sample tube parameters click Edit to the right of the Sample tube dropdown
list. Refer to Sample Tube, page 2-16 for instructions on saving the sample tube parameters to
make them available in the Sample tube dropdown list.
8. In the Mass group box, indicate if mass is to be manually entered by the operator (Enter) or
calculated by the system (Calculate). Refer to Mass group box, page 3-12.
9. In the Type of Data group box, indicate if the data is to be automatically collected by the system
or manually entered by the operator.
10. The optional user-defined fields in the User Parameters group box may be used to enter and
track information from another instrument or source, along with other statistical process control
(SPC) data. To omit these fields in sample files, select the Omit checkbox to the right of the field.
Refer to Sample Information Files, page 3-10.
11. Use the Comments text box to enter notes about the Method.
12. After completing the Sample Description window, select the parameter tabs to edit other sample
information file parameters. The saved parameter defaults become the defaults for new sample
files. Refer to Defining Parameter Files, page 2-16.
13. Click Save, then click Close.
The labels for the Sample, Operator, Submitter, and Bar Code fields can be modified by
overwriting the default labels. These fields can also be omitted from a sample file by
selecting the Omit checkbox.
To Next Page
Loading...
Need help?
General
