ASAP 2460 Operator’s Manual Defining Parameter Files
246-42800-01 - Aug 2013 2-27
3. Right click in the graph area of the interactive reports window and select Copy Data. This will
copy the data from the active file to the clipboard.
4. Go to File > New Sample and open a new sample information file.
5. On the Sample Description window, select Manually entered in the Type of Data group box.
6. In the dropdown list at the bottom of the window, select Isotherm.
7. Resize the interactive isotherm window until the Paste button displays.
8. Click Paste. The isotherm data from the original sample file is pasted from the clipboard and
displays in the new sample file.
Right click in the
graph area and
select Copy
Data
To Next Page
Loading...
Need help?
General
