Preparing for Analysis ASAP 2460 Operator’s Manual
2-32 246-42800-01 - Aug 2013
After degassing is complete, perform the following steps:
1. Weigh the sample tube set containing the sample and record the weight on the Sample Data
Worksheet as [B] Sample tube set plus sample mass (After Degas).
2. Subtract the [A] Mass for empty sample tube set (Before Degas) from the [B] Sample tube set plus
sample mass (After Degas) to obtain the sample’s mass. Record this value as [C] Sample mass
(After Degas).
To Next Page
Loading...
