5 - 1
5 Managing Configurations
5.1 Configuration Introduction
When performing measurement or continuously monitoring on a patient, the clinical
professional often needs to adjust the monitor’s settings according to the patient’s
condition. The collection of all these settings is called a configuration. The system
configuration items can be classified as: parameter configuration items, conventional
configuration items, and user maintenance items. Allowing you to configure the monitor
more efficiently, the monitor provides different sets of configurations to accommodate
the varying patient categories and departments. You can change some settings from a
certain set of configuration and then save the changed configuration as a user
configuration.
The default configurations provided for your monitor are department-oriented. You can
choose any of the following department:
■ Wards
■ Emergency Department
■ Physician Office
■ Ambulatory Surgery Center
• The configuration management function is password protected. The
configuration management tasks must be performed by clinical
professionals.
5.2 Changing the Department
If the current department configuration is not the one you want to view, you can change
the department by following this procedure:
1. Select the Main Menu quick key → from the Configuration column select
Manage → input the required password → select .
2. Select Department Type.
3. Select a department.
4. Select OK.
To Next Page
Loading...
Need help?
General
