EasyManuals Logo

Mindray VS 9 User Manual

Mindray VS 9
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
19 - 5
19.6 Connecting an External Battery
You can connect an external battery to the monitor via the connector on the back.
The external battery is charged whenever the monitor is connected to an AC power
source regardless of whether or not the monitor is currently on.
19.7 Charging a Battery
The battery is charged whenever the monitor is connected to an AC power source
regardless of whether or not the monitor is currently on. When battery is charging, the
AC power indicator and battery indicator are both on.
19.8 Maintaining the Battery
19.8.1 Conditioning the Battery
The performance of a rechargeable battery deteriorates over time. You should condition
the batteries every three months.
If the battery is not conditioned for a prolonged time, its charge indication may not be
accurate and you may wrongly evaluate the remaining battery runtime.
To condition a battery, follow this procedure:
1. Disconnect the monitor from the patient and stop all monitoring and measuring
procedures.
2. Turn the monitor off. Install the battery to be conditioned.
3. Connect the monitor to AC power. Allow the battery to be charged uninterrupted
till it is fully charged.
4. Remove AC power and allow the monitor to run from the battery until it shuts off.
Connector for an
External Battery
VS 9 Series
VS 8 Series

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mindray VS 9 and is the answer not in the manual?

Mindray VS 9 Specifications

General IconGeneral
BrandMindray
ModelVS 9
CategoryMedical Equipment
LanguageEnglish

Related product manuals