18 - 24
18.18 The Other Tab
Menu Item Default Setting Function
Barometric Pressure 760 mmHg Sets the barometric pressure.
SpO2 Tone Mode 1 Selects the SpO
2
tone. The same SpO
2
tone mode should be used for
monitors in the same area.
Clear CMS IP at startup On /
Language / /
Parameter Output Setup / Configures DIAP protocol parameters
to realize communications between
the monitor and third party devices.
Export Patient Data / To export the patient data to a USB
drive.
Browse System Log / To browse the system log.
Export System Log / To export the system log to a USB
drive.
Modify Password / To modify maintenance password.
To Next Page
Loading...
Need help?
General
