7 - 4
7.3.4 Alarm Status Symbols
Apart from the alarm indicators as described in 7.3.3 Alarm Indicators, the monitor uses
the following symbols to indicate the alarm status:
7.4 Checking Alarm List
To check the alarm list, follow this procedure:
1. Select the technical alarm area to check the Technical Alarms.
2. Select the physiological alarm area to check the Physiological Alarms.
7.5 Accessing On-screen Help for Technical Alarms
(AlarmSight)
In the technical alarm list, alarm messages followed by Detail include help messages or
pictures to help you identify the problem. This function is called AlarmSight. To access
AlarmSight, follow this procedure:
1. Select the technical alarm area to check the Technical Alarms list.
2. From the alarm list select Detail on the right of the desired alarm.
7.6 Changing Alarm Settings
From the Alarm column of the main menu select desired buttons to set alarm
properties.
7.6.1 Setting Parameter Alarm Properties (Continuous
Monitoring Mode)
For workflows under Continuous Monitoring, you can set the alarm properties of
physiological alarms of each parameter. Every time you switch to a workflow, the alarm
settings of the workflow are loaded. For details, see 3.9.2.4 Changing Alarm Settings.
Alarm pause: indicates that all the alarms are paused.
Alarm off: indicates that individual measurement alarms are turned off or
the system is in the alarm off status.
Audio pause: indicates that audible alarm tones are paused.
Audio off: indicates that audible alarm tones are turned off.
Alarm reset: indicates that alarms are acknowledged and the alarm system is
reset.
To Next Page
Loading...
