3 - 11
3.9 Configuring Your Monitor
Before putting your monitor in use, other preferential settings can be made to ease your
operations.
3.9.1 Setting Device Location
To better locate and manage your monitor, you can set the location information. Follow
this procedure:
1. Select the Main Menu quick key → from the System column select Maintenance
→ input the required password → select . The Device Location tab is
displayed.
2. Set Location.
◆ Fixed: the Patient Management menu displays Bed No and Room No, but
you cannot change them. If your monitor is installed at a fixed position, or
Neonate, male (blue) Neonate, female (pink)
Wired network is
connected.
Wired network is not
connected.
All alarms are paused. Individual physiological
alarms are turned off or the
monitor is in the alarm off
status
Audible alarm tones are
paused.
Alarms are acknowledged
and the alarm is reset.
Audible alarm tones are
turned off.
CMS is connected. Press this
button to select another
available CMS, if any.
Wireless network is
connected. The solid part
indicates network signal
strength. Press this button
to select another available
network, if any.
Wireless network cannot be
connected.
Bluetooth device is
connected.
Bluetooth function is
enabled.
Symbol Description Symbol Description
To Next Page
Loading...
Need help?
General
