5 - 2
• Changing the department will delete all current user configurations.
5.3 Setting Default Patient Category
To set the default patient category when admitting a new patient, follow this procedure:
1. Select the Main Menu quick key → from the Configuration column select
Manage → input the required password → select .
2. Set Default Patient Category.
5.4 Setting Workflows
For details, refer to 3.9.2 Setting the Workflow.
5.5 Transferring a Configuration
When installing several monitors with identical user configurations, it is not necessary to
set each unit separately. Use a USB drive to transfer the configuration from monitor to
monitor.
5.5.1 Exporting a Configuration
To export the current monitor’s configuration, follow this procedure:
1. Connect a USB drive to the monitor’s USB port.
2. Select the Main Menu quick key → from the Configuration column select
Manage → input the required password → select .
3. Select Export Configuration.
4. Select the workflows and User Maintenance Settings to export.
5. Select Export.
5.5.2 Importing a Configuration
To import the configuration from the USB drive to the monitor, follow this procedure:
1. Connect the USB drive to the monitor’s USB connector.
2. Select the Main Menu quick key → from the Configuration column select
Manage → input the required password → select .
3. Select Import Configuration.
4. Select the workflows and User Maintenance Settings to import.
5. Select Import.
To Next Page
Loading...
