14 - 2
If you need to change the parameters to be displayed or their sequence in the list, refer
to 14.4.1 Changing the Display of Manual Parameters.
14.3 Inputting/Editing Parameter Information
Follow this procedure:
1. Select a parameter in the list, and input the information as instructed below:
◆ : input a value with the popup on-screen keyboard, or set the parameter
in the displayed menu.
◆ : select an option from the popup list.
◆ The range or options of the parameters are shown below:
(1) * symbol: indicates the parameter can be used for EWS calculation.
(2) Parameter name
(3) Parameter setup area: select to input a value, show the options, or a setup menu.
Parameter Range
Blood Sugar 1.0 mg/dl -720.0 mg/dl (0.06 mmol/L -40.00 mmol/L)
Height 20.0 cm - 300.0 cm
Weight 0.1 kg -499.0 kg
FiO
2
21% ~100%
O
2
Flow Rate 0.1 L/min -20.0 L/min
I/O Fluid 1-10000 ml
0.001 - 10.000 L
LOC (GCS) 3-15
LOC (AVPU) Alert, Reacting to voice, Reacting to pain, Unresponsive
O
2
Source
Room Air, Aerosol Mask, Bi PAP, C PAP, Face Mask, Mask, Bnasal
Cannula, Nonrebreather, Partial Rebreather, T-piece, Trach Collar,
Ventilator, Venturi Mask, Oxymizer
LOC (ACVPU) Alert, Confusion, Reacting to voice, Reacting to pain,
Unresponsive
Supp. O
2
Yes, No
To Next Page
Loading...
Need help?
General
