EasyManua.ls Logo

Mindray VS 9 - Care and Cleaning; Care and Cleaning Safety Information

Mindray VS 9
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 - 1
20 Care and Cleaning
20.1 Care and Cleaning Introduction
In this chapter we only describe cleaning and disinfection of the monitor (not including
the cradle of Convidien Genius™ 3tethered tympanic thermometer), and certain
accessories. For the cleaning and disinfection of the other reusable parameter
accessories, refer to their instructions for use.
20.2 Care and Cleaning Safety Information
WARNING
Use only Mindray approved cleaners, disinfectants and methods listed in this
chapter to clean or disinfect your equipment or accessories. Warranty does
not cover damage caused by unapproved substances or methods.
Do not mix disinfecting solutions, as hazardous gases may result.
We make no claims regarding the efficacy of the listed chemicals or methods
as a means for controlling infection. For the method to control infection,
consult your hospital’s infection control officer or epidemiologist.
Be sure to turn off the system and disconnect all power cables from the
outlets before cleaning the equipment.
The responsible hospital or institution shall carry out all cleaning and
disinfection procedures specified in this chapter.
CAUTION
Never immerse any part of the equipment or accessories in liquids or allow
liquid to enter the interior.
Any contact of cleaners or disinfectants with connectors or metal parts may
cause corrosion.
Do not pour or spray any liquid directly on the equipment or accessories or
permit fluid to seep into connections or openings.
If you spill liquid on the equipment or accessories, disconnect the power
supply, dry the equipment, and contact your service personnel.
Never use abrasive materials (such as steel wool or silver polish), or erosive
cleaners (such as acetone or acetone-based cleaners).

Table of Contents

Related product manuals