20 - 2
• Dilute and use the cleaners or disinfectants according to the manufacturer's
instructions.
• Check the equipment after cleaning and disinfecting. If there is any sign of
damage, remove it from use.
20.3 Cleaning and Disinfecting the Main Unit
20.3.1 Cleaning the Main Unit
Clean the monitor on a regular basis. Before cleaning, consult your hospital’s regulations.
To clean the monitor, follow this procedure:
1. Dampen a soft lint-free cloth with water or ethanol (70%).
2. Wring excess liquid from the cloth.
3. Wipe the display screen of the monitor.
4. Wipe the external surface of the main unit with the damp cloth, avoiding the
connectors and metal parts.
5. Dry the surface with a clean cloth. Allow the equipment and mounting kits air dry
in a ventilated and cool place.
• During the cleaning procedure, disable the touch operation by switching off
the monitor or locking the touchscreen.
• Any contact of cleaners or disinfectants with connectors or metal parts may
cause corrosion.
20.3.2 Disinfecting the Main Unit
Disinfect the monitor as required in your hospital’s servicing schedule. Cleaning the
monitor before disinfecting is recommended. Always dilute and use disinfectants
according to the manufacturer's instructions.
20.3.3 Approved Cleaning and Disinfecting Agents for Main Unit
The following table lists approved cleaning and disinfecting agents:
Product Name Product Type Manufacturer
Alpet® D2
Surface Sanitizing Wipes
Wipes BEST SANITIZERS INC™.
To Next Page
Loading...
Need help?
General
