Mindray VS 9 - 18.14.2 the JADAK Barcode Tab; The Identify Scanner Tab (for the Non-Mindray Custom 2 D Barcode Reader)

18 - 17
18.14.2 The JADAK Barcode Tab
18.14.3 The Identify Scanner Tab (for the non-Mindray Custom 2D
Barcode Reader)
Patient
Barcode
Prefix / Sets the prefix for patient barcode.
Postfix / Sets the postfix for patient barcode.
Remove
Prefix/Suffix
Off Sets whether to remove the set prefix or
postfix.
Content Fill
to
Patient ID Selects a destination to fill the scanned
information.
Clinician
Barcode
Prefix / Sets the prefix for clinician barcode.
Postfix / Sets the postfix for clinician barcode.
Remove
Prefix/Suffix
Off Sets whether to remove the set prefix or
postfix.
Section Menu Item
Default
Setting
Description
Menu Item Default Setting Function
Patient Category / Sets the information of JADAK
barcode.
Gender /
Age /
Month /
Tab Default Setting Function
Identify Scanner / When you are using barcode readers other
than HS-1R or HS-1M, you should select the
barcode reader from the USB device list, so that
the monitor can identify the barcode reader.
From the USB device list, select the barcode
reader you are using.