Mitutoyo HR-530 Series - Page 153

No. 99MBG518A
E-1
PART E : 1 Test Flow
1
Test Flow
1.1
Method to Test One Point
Thissectionexplainstheoperationowtotestonepoint.
Preparation
Test method settings
"2.1 Test Method Settings" (page
E-6)
Display conditions settings
"2.2 Display Conditions Settings"
(page E-7)
Indenter and test force settings
"2.3 Indenter and Test Force Set-
tings" (page E-8)
Indenter mounting
"2.4 Mounting the Indenter" (page
E-9)
Test time settings
"2.5 Test Time Settings" (page
E-9)
■When setting a GO/NG judgment
GO/NG judgment settings
"2.6 GO/NG Judgment Settings"
(page E-9)
Testing the test block
"2.7 Testing the Test Block" (page
E-10)
Correction value setup
"2.8 Correction Value Setup" (page
E-14)