Motion Control Engineering Motion 4000 User Manual

3-1
In this Section
This section contains instructions for preparing the car for normal automatic operation. If you
are viewing this on a computer, click the blue text to jump to the appropriate section.
• Setting basic service parameters. Basic Service Parameters on page 3-2.
• Learning floor levels. Learning Floor Levels & Counterweight Position on page 3-2.
• Balance Car and Counterweight. Car and Counterweight Balance on page 3-8
• Setting motion/position parameters. Setting Motion/Position Parameters on page 3-9.
• Setting Up Performance Curves. Setting Up Performance Curves on page 3-12.
• Learning hoistway switches. ELGO Encoded Magnetic Tape on page 3-3. For LS-EDGE,
refer to Hoistway Learn, LS-EDGE on page 3-5.
• Coming up to contract speed. Additional Adjustment on page 3-18.
• How to place car calls from the controller. Placing Calls From the Controller on page 3-21.
• Load testing AC drives. Load Testing AC Drives on page 3-22.
•Load Weigher Adjustment. Load Weigher on page 3-24.
• Acceptance Testing. Final Tests on page 3-34.
•Final Adjustment. Final Adjustment on page 3-55.
Final Adjustments

Motion Control Engineering Motion 4000 Specifications

General

Brand	Motion Control Engineering
Model	Motion 4000
Category	Controller
Language	English