Motion Control Engineering Motion 4000 User Manual

User Interface
4-112 Manual # 42-02-2P24
Monitoring and Reporting Menu
If the controller is configured for monitoring or reporting connections through Ethernet, this
menu is used to set up the port and to view communication statistics for diagnostic purposes.
• With “Monitoring and Reporting Menu” displayed, press S to enter the menu. The first
screen provides a way to exit the menu without making changes. Press N to continue.
• The next screen provides the version number of the monitoring software in the controller.
Press N to continue.
• The monitored type screen displays the controller type being monitored.
• Press N to move on. The IP address screen allows the IP address to be set:
• Press S to move from digit to digit.
• Press + or - to change value.
• Press N to exit.
• The subnet mask screen allows the mask address to be set:
See note on following page.
See note on following page.

Motion Control Engineering Motion 4000 Specifications

General

Brand	Motion Control Engineering
Model	Motion 4000
Category	Controller
Language	English