Motion Control Engineering Motion 4000 User Manual

2-1
In this Section
This section contains instructions for installing the controller and peripheral equipment. If you
are reading this on a computer, click the blue text to jump to the appropriate section.
• Safety: page 2-2.
• Preparation: page 2-3.
•MCE Wiring Prints: page2-5.
• Controller Installation: page 2-6.
• Connect AC power: page 2-10.
• Connect motor, brake, encoder: page 2-11.
•Emergency Brake/Rope Gripper installation: page 2-14.
• Initial Power Up: page 2-14.
• Auto-Tune Drive: page 2-17.
• Set up for Construction operation: page 2-28.
• Set up for Inspection operation: page 2-51.
• Running on Inspection: page 2-54.
• Finishing Installation: page 2-55.
• Installing the landing system: page 2-56.
• Adjust Brake: page 2-83.
• Traction Auxiliary Power Supply: page 2-84.
• Installation Review: page 2-84.
Installation

Motion Control Engineering Motion 4000 Specifications

General

Brand	Motion Control Engineering
Model	Motion 4000
Category	Controller
Language	English