Installation
2-24 Manual # 42-02-2P24
Magnetek AC Drive Introduction
Take the time to study the drive manual. It has very important startup and other information
that are beyond the scope of this manual.
Digital Operator
The keypad and display are mounted on the digital operator.
Figure 2.8 Magnetek AC Drive
Keypad Operation
Please refer to “Magnetek Keypad Overview” on page 2-25.
Clear Fault
Most faults clear automatically. If a persistent (serious) fault is displayed, the drive will shut
down. To clear the fault after correcting the cause:
• Access the drive Faults F0 menu, submenu Active Faults, F1.
• Go to Reset Active Faults. Press Enter.
Digital Operator
HPV 600 drive shown. Other AC drives similar.
To Next Page
Loading...
Need help?
General
