Motion Control Engineering Motion 4000

Final Adjustment
3-55
3
Motion 4000
Final Adjustment
Once you are satisfied that the car is operating accurately and safely, you will want to ride the
car to verify the comfort of the ride and proper operation from a passenger perspective.
1. Place the car on Independent Service so that it will not respond to hall calls.
2. Verify IND indicator on HC-CTL Control board is lighted.
3. Verify the TEST switch is in the NORMAL position.
4. Verify the LCD displays INDEPENDENT.
While riding the car:
• Verify proper door operation including re-opening, nudging, safe edge, photo eye, and
door open and close button operation.
• Verify proper floor leveling at all landings.
Place the car on Normal operation. Verify:
• Hall call operation
•PIs and gongs
• Fire return and in-car operation for main and alternate landings
• Alternate riser operation
• Other options as required per job
• Normal and Inspection Mode Fault Bypasses to OFF
•F3 function switch UP
• System Mode/Controller System Menu
• Automatic mode fault bypass: Bypass OFF
• Inspection mode fault bypass: Bypass OFF
• Make adjustments as required.