Motorola RFS Series System Reference Guide

Switch Security 6-77
4. Revise the following information as required to render the existing transform set useful.
5. Refer to the Status field for the state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel to close the dialog without committing updates to the running configuration.
6.7.1.2 Adding a New Transform Set
A transform set represents a combination of security protocols and algorithms. During the IPSec security
association negotiation, peers agree to use a particular transform set for protecting data flow. If the
attributes of an existing transform set no longer lend themselves useful, and an existing transform set is not
required, create a new transform set to meet the needs of your network.
To edit the attributes of an existing transform set:
1. Select Security > IPSec VPN from the main menu tree.
2. Click the Configuration tab.
Name The name is read-only and cannot be modified unless a new transform set is
created.
AH Authentication
Scheme
Select the Use AH
checkbox (if necessary) to modify the AH Transform
Authentication scheme. Options include:
• None - No AH authentication is used.
• AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
ESP Encryption
Scheme
Select the Use ESP checkbox (if necessary) to modify the ESP Encryption Scheme.
Options include:
• None - No ESP encryption is used with the transform set.
• ESP-DES - ESP with the 56-bit DES encryption algorithm.
• ESP-3DES - ESP with 3DES, ESP with AES.
• ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
• ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
• ESP-AES 256 - ESP with 3DES, ESP with AES (256 bit key).
ESP Authentication
Scheme
Select the Use ESP checkbox (if necessary) to modify the ESP Authentication
Scheme. Options include:
• None - No ESP authentication is used with the transform set.
• MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Mode Modify (if necessary) the current mode used with the transform set. The mode is
either Tunnel or Transport.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English