Modifying Operators
Follow the instructions outlined below to modify an Operator's set-up including the Operator
Name, PIN Code, status or assigned Accounts.
How to modify an Existing Operator
To modify an existing Operator:
1.
Log in as the Supervisor (see How to log in as Supervisor on page 184), then:
Press and type 5.3 or select the path:
Account Management Manage Operators
The Manage Operator Screen appears.
2. Select Operator List.
3. Select the operator and select Edit / Del. .
4. Select Edit / Modify (or type 1 ).
The Edit / Modify Screen appears.
5. Change the Operator options as needed and press [OK] to display the Operator
Modification Summary Screen (Use the [C] key to clear characters).
6. Press [OK] to accept your changes.
130
| Page 130 | | janv.-12-2012 11:42 |
To Next Page
Loading...
Need help?
General
