Neopost IS-5000 Operator's Manual

System Time-Outs and Settings8.6
Your Mailing System includes the following Time-Out Settings:
•
System Motor Time-Outs
•
Sleep Mode Time-Out
System Time-Outs
System Time-Out preferences include:
The period of time the system waits for an envelope to enter the mail path
after pressing . Once this Time-Out is reached the system motors will
stop running.
Start
The period of time the system waits for the next envelope to enter the mail
path after printing the previous envelope(s). Once this Time-Out is reached,
the system motor will stop running.
Stop
The period of time (in minutes) the system waits for an interaction with a
User before automatically switching to Sleep Mode (seePower Management
on page 31 ).
Sleep
How to adjust Time-Out Settings
To adjust a Time-Out:
1.
Be sure to be logged in as a User, then:
Press and type 2.7 or select the path:
Job Settings Time-Out Settings
The Time-Out Setting Screen appears.
2. Select each field and type the time-outs.
3. Press [OK] to exit.
This is a User Setting that will only be active as long as you are
logged in as a User. Once you log out, the Default Time-out Settings
will be re-activated.
193
| Page 193 | janv.-12-2012 11:42 |
8
Configuring your Mailing System

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English