Neopost IS-5000 Operator's Manual

Changing Languages8.3
The User Screens on your Mailing System can be shown in English or French as you
require.You can change the language displayed on your system for a particular job run or
as a Default Setting.
How to change the Languages
To change the current language for a particular Job Run:
1.
Be sure to be logged in as a User, then:
Press and type 11.1 or select the path:
Preferences Language
2. Select the language you wish to use.
3. Press [OK] to validate your selection.
This is a User Setting that will only be active as long as you are
logged in as a User. Once you log out, the Default Language Setting
will be re-activated.
Setting Default Languages
You can set the Default Language of your Mailing System by completing the instructions
outlined below.
186
| Page 186 | | janv.-12-2012 11:42 |
8
Configuring your Mailing System

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English