Neopost IS-5000 Operator's Manual

Processing Special Job Types3.4
Date Correction Mode
How to Correct the Date (Settings)
Required settings:
1. Make sure you are on the Date Correction Home Screen. .This Home Screen
indicates the current date.
2.
To change the type of Meter Impression, press to access the Built impression
Screen, and then press [OK] to display the Type of Impression Screen.
Select [Date Correction ] and press [OK] to validate
3.
Change the Postage Date .
Today's date is always printed by default. To change the date, press to access
the Imprint screen, and then select Date to display the Date Advance Screen.
- Select a date.
- Press to return to the Home Screen.
Other possible settings:
1. You can adjust the print location of your Impression on your envelopes if necessary.
Adjusting the print location (Print Offset) is used to compensate for envelopes with a
steep edge.
See How to move a Meter Impression (Print Offset) on page 87 .
You are now ready to process your mail.
58
| Page 58 | | janv.-12-2012 11:42 |
3
Processing Mail

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English