Neopost IS-5000 Operator's Manual

How to set up a Manifest (Statement of Mailing)
Required settings:
1. Make sure you are on the Home Screen of the [Statement of Mailing] Meter
Impression
.
The Home Screen indicates the date as illustrated below.
2.
To change the type of Meter Impression, press to access the Build Impression
Screen, then press [OK] to display the Type of Impression Screen. Select Statement
of Mailing and press[OK] to accept
3.
Enter the Statement of Mailing amount.
You can enter the postage value using 2 methods.
(1) From the Impression Type Home screen:
- Begin to type in the amount of postage to be added (keys 1 to 9 or dot).The Amount
Entry Screen will appear as you type.
- Complete entering the amount, press [OK] to accept the amount and to return to
the Build Impression Home Screen.
(2) From the Build Impression Screen:
- Select the Statement of Mailing line and press [OK].
- Enter the amount in and press [OK] to accept.
- Press to return to the Home Screen.
You are now ready to print a Manifest (Statement of Mailing).
Printing a Manifest (Statement of Mailing)
Once you have completed setting up your Impression, follow the instructions below to print
a Manifest (Statement of Mailing) Meter Impression.
70
| Page 70 | | janv.-12-2012 11:42 |
3
Processing Mail

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English