Neopost IS-5000 Operator's Manual

1. Place the envelopes (or stack) in the Hopper.The items should be placed against the
rear wall and covering the optical (clear) sensor.The recommended print area on the
envelope is either on the back or upside down on the front.
2.
Press to start.
The Mailing System seals/counts the mail pieces and sends them to the Catch Tray.
Printing a Manifest [Statement of Mailing]
In this Section
This section describes the system settings to be selected and the mail preparation steps
to be completed in order to print a Manifest [Statement of Mailing].
Set-Up Requirements
The instructions below outline the steps that you need to complete to set up your system
to print a Manifest Meter Impression
•
As mail requirements differ from day to day, some of the Impression Options may
not be necessary, or their order may vary.
•
Begin by selecting a Meter Impression to gain access to the Impression Options that
you may need to process your mail with a Manifest Meter Impression.
Make sure you have completed the preparation steps mentioned
in Sorting Mail by Type and Task on page 40.
3
Processing Mail
69
| Page 69 | janv.-12-2012 11:42 |

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English