Filling and Cleaning the Sealer10.2
Filling the Sealer Bottle
The Mixed Mail Feeder uses water and/or Sure Seal for sealing envelopes. For optimum
sealing results, using Sure Seal is recommended, but is not mandatory.
If the system runs out of sealing fluid during a job run the system will continue to process
your items but your envelopes may not be sealed properly.
How to fill the Sealer Bottle
To refill the Sealer Bottle:
1. Remove the Sealer Bottle from its base and turn it over.
2. Unscrew the cap and fill the bottle with fluid up to the limit marks.
3. Screw the cap back on and put the bottle back into place.
Cleaning the Water Filter
A water filter is installed in your Mailing System.
It is necessary to clean it regularly.
252
| Page 252 | | janv.-12-2012 11:42 |
10
Maintaining your Mailing System
To Next Page
Loading...
Need help?
General
