Default Impression Settings8.9
The Default Impression Settings that can be changed include:
•
Default Impression Preferences: sets the Default Postage Rate and the Slogan
Type that is activated automatically each time a User begins to set up a job run.
•
Automatic Date Advance: allows you to print to a future date on your mail.This is
useful if you process mail after the last mail pickup for the day.This ensures that the
proper Date of Mailing is printed for the next day’s mail pickup.
•
Printing Offset: sets the Default Offset print position from the right edge of the
envelope.
You can also set how you want to print on Labels :
•
using the internal Label Dispenser that prints on precut Labels
Default Impression Settings
There are several Default Impression Settings that you can change as needed.These
settings include:
•
The Default Postage Rate
•
The Default Permit Impression
•
The Default Slogan
When viewing lists that appear on your Screen, the check mark indicates a Default
Impression Setting.
Default Postage Rate
This setting defines the Postage Rate that is automatically activated by your system each
time a User begins to set up a Job Run.
How to change the Default Postage Rate
To change the Default Postage Rate:
1.
Log in as the Supervisor (see How to log in as Supervisor on page 184), then:
Press and type 3.3.3 or select the path:
Default User Settings Default Impression Preferences Default Rate
205
| Page 205 | janv.-12-2012 11:42 |
8
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
