Neopost IS-5000 Operator's Manual

4. Click OK to validate your selection.
5. A warning window appears explaining when you should use 'Check on zero weight'.
Click OK to confirm or Cancel to keep the previous activation state.
Default Weighing Mode
This setting defines both the Weighing Device and the Weighing Mode that are automatically
activated by your system each time a User begins to set up a Job Run (see Choosing a
Weighing Mode on page 76 ).
How to change the Default Weighing Mode
To change the Default Weighing Mode:
1.
Login as the Supervisor then (see How to log in as Supervisor on page 184 ):
Press and type 3.2.5 or select the path:
Default User Settings System Settings Default Weighing Mode
2. Select a Default Weighing Mode from the list.
3. Press [OK] to validate.
210
| Page 210 | | janv.-12-2012 11:42 |
8
Configuring your Mailing System

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English