How to De-activate the Automatic Weight Detection on the
Weighing Platform
To de-activate the Automatic Weight Detection on the Weighing Platform:
1.
Log in as the Supervisor (see How to log in as Supervisor on page 184 ), then:
Press and type 3.2.9 or select the path:
Default User Settings System Settings Auto Weight Detection
2. Select No Auto Weight Detection to de-activate the function.
3. Press [OK] to validate.
GEO Code
The Weighing Platform and iWeigh Dynamic Scale calculates mail piece weights that have
to be corrected according to the geographical location of your Mailing System because
weights can change with the altitude and latitude.The Geodesic Code used to adjust the
weight value may be entered into your system:
•
Automatically with E-services
•
Manually in Supervisor Mode
8
Configuring your Mailing System
201
| Page 201 | janv.-12-2012 11:42 |
To Next Page
Loading...
Need help?
General
