Neopost IS-5000 Operator's Manual

2. Set the switch on the back of the Conveyor Stacker to 0°.
3. Make sure that the Stacker is correctly installed.
How to Install the Conveyor Stacker at +90°
Assemble to Connection Plate
1. Align the flange of the two guide holes as shown by the arrow.
224
| Page 224 | | janv.-12-2012 11:42 |
8
Configuring your Mailing System

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English