Neopost IS-5000 Operator's Manual

2. Remove the envelope from the Weighing Platform.
3. Place an envelope (or stack) in the hopper.Your items should be placed against the
rear wall and covering the optical (clear) sensor.
The Mailing System applies postage and the envelopes are sent to the mail tray or
stacker.
To print one or more identical Labels
1.
Press .
A Label Selection Screen is displayed.
2. Type the number of Labels you wish to print.
3. You may change the Label Dispenser you want to use (if the Automatic Label Dispenser
is connected), by pressing Print On.
4.
Press to start printing.
54
| Page 54 | | janv.-12-2012 11:42 |
3
Processing Mail

Neopost IS-5000 Specifications

General

Brand	Neopost
Model	IS-5000
Category	Digital Mailing system
Language	English